Browsing by Author "Kumar, Prabhat"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • No Thumbnail Available
    Aseptic Processing of a Low-acid Multiphase Food Product using a Continuous Flow Microwave System.
    (2006-08-18) Kumar, Prabhat; Dr. Peter S. Fedkiw, Committee Member; Dr. Josip Simunovic, Committee Member; Dr. K.P. Sandeep, Committee Chair
    Continuous flow microwave heating is an emerging technology in the food industry with a potential to replace the conventional retort process for viscous and pumpable food products. Aseptic processing of a low-acid multiphase food product using continuous flow microwave heating system can combine the advantages of an aseptic process along with those of microwave heating. The main objective of this research was to develop a systematic approach for biological validation of aseptic processing of salsa con queso products using a continuous flow microwave system operating at 915 MHz. Dielectric properties of pumpable food products were measured by a new approach (under continuous flow conditions) and compared with the dielectric properties measured by the conventional approach (under static conditions). The results suggested that, for a multiphase product, dielectric properties measured under continuous flow conditions should be used for designing a continuous flow microwave heating system. Thermophysical and dielectric properties of salsa con queso and its vegetable ingredients (tomatoes, bell peppers, jalapeno peppers, and onions) were measured at a temperature range of 20 to 130 C. The results were used to fabricate design particles from PP (polypropylene) and PMP (polymethylpentene) using a custom developed CPD (Conservative Particle Design) software. These particles could be used as thermo-sensitive implant carriers for bacterial spores in biological validation of a multiphase aseptic process. Salsa con queso was processed in a 5 kW microwave unit with a specially designed focused applicator. The temperature profiles at the outlet during processing of salsa con queso in the 5 kW microwave unit showed a narrow temperature distribution between the center and the wall of the tube. Thus, continuous flow microwave heating could overcome the problems (degradation of color, flavor, texture, and nutrients) associated with the wider temperature distribution between the center and the wall in a conventional heating system. The results from this study will assist processors in designing a safe process for aseptic processing of salsa con queso using a continuous flow microwave system. However, further research is required to biologically validate such a process as the final step in establishing an aseptic process for salsa con queso using a continuous flow microwave system.
  • No Thumbnail Available
    Development of Bio-nanocomposite Films with Enhanced Mechanical and Barrier Properties Using Extrusion Processing
    (2009-11-20) Kumar, Prabhat; Dr. E. Allen Foegeding, Committee Member; Dr. Russell E. Gorga, Committee Member; Dr. Van Den Truong, Committee Co-Chair; Dr. K.P. Sandeep, Committee Chair
    Recently, a new class of materials represented by bio-nanocomposites (biopolymer matrix reinforced with nanoparticles) has proven to be a promising option in improving mechanical and barrier properties of biopolymers derived from renewable sources. Therefore, the current study was undertaken with the main objective of developing bio-nanocomposite films based on soy protein isolate (SPI) and montmorillonite (MMT) with enhanced mechanical and barrier properties by melt intercalation using extrusion processing. Effects of extrusion processing parameters (screw speed and barrel temperature distribution) and type (natural and modified) and content (0-15%) of MMT on the structure (degree of intercalation and exfoliation) and properties (mechanical, dynamic mechanical, thermal stability, and water vapor permeability) of SPI-MMT bio-nanocomposites were studied. The arrangement of MMT in the bio-nanocomposite matrix ranged from exfoliated to intercalated depending on the type (natural and modified) and content of MMT. The results showed that extrusion of SPI and MMTs resulted in bio-nanocomposites with exfoliated structures at lower MMT content (5%) for natural (Cloisite Na+) as well as modified MMTs (Cloisite 20A and Cloisite 30B). At higher MMT content (15%), structure of bio-nanocomposites ranged from intercalated for Cloisite Na+ and Cloisite 20A to disordered intercalated for Cloisite 30B. Higher screw speed and barrel temperature resulted in films with improved mechanical and dynamic mechanical properties. Higher screw speed also resulted in films with lower water vapor permeability (WVP). However, the effect of barrel temperature distribution on WVP was insignificant. There was a significant improvement in mechanical and dynamic mechanical properties, thermal stability, and WVP of the films with the addition of natural and modified MMTs. At a MMT content of 5%, bio-nanocomposite films based on modified MMTs had better mechanical, dynamic mechanical, and water barrier properties as compared to those based on natural MMT. However, films based on modified MMTs were thermally less stable at temperatures higher than 500 °C as compared to films based on natural MMT. This study shows the potential of films based on SPI and Cloisite 30B to replace some of the existing plastics such as LDPE and PVDC. However, much higher WVP values of these films as compared to those of LDPE and PVDC might limit the application of these bio-nanocomposite films to packaging of high moisture foods such as fresh fruits and vegetables. Further research is required to improve the properties of these SPI-MMT bio-nanocomposite films for commercial application.