Economic Analysis of using MEMS technology for monitoring warp tension and breaks in weaving

Show simple item record

dc.contributor.advisor Dr. George L. Hodge, Co-Chair en_US
dc.contributor.advisor Dr. Abdelfattah Seyam, Co-Chair en_US
dc.contributor.advisor Dr. William Oxenham, Member en_US
dc.contributor.advisor Dr. Thomas Honeycutt, Member en_US
dc.contributor.author Kobaner, Can en_US
dc.date.accessioned 2010-04-02T18:02:25Z
dc.date.available 2010-04-02T18:02:25Z
dc.date.issued 2002-01-02 en_US
dc.identifier.other etd-20011219-112140 en_US
dc.identifier.uri http://www.lib.ncsu.edu/resolver/1840.16/1234
dc.description.abstract Micro-electro-mechanical-systems (MEMS) comprise a range of technologies that enable the fabrication of micron-sized, solid state devices such as sensors and actuators. MEMS manufacturing technologies enable the development of many exciting micro-scale or micro miniaturized products. This paper presents a decision model for evaluating the potential cost/benefit of different applications of MEMS for textiles. The objective is to determine the feasibility of replacing current warp tension measurement methods with MEMS. In order to accomplish this goal, a literature survey was conducted to document the current economic models and cost justification issues as well as the fundamentals of MEMS. From this survey, decision methodologies were identified and a decision model was established. To establish this model, Microsoft Excel (version Excel 2000) spreadsheet was used as a tool. The results from this model have been used to analyze the feasibility of using MEMS technology in measuring warp tension for textile applications.Finally, conclusions and recommendations for future applications have been covered. en_US
dc.rights I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. en_US
dc.title Economic Analysis of using MEMS technology for monitoring warp tension and breaks in weaving en_US
dc.degree.name MS en_US
dc.degree.level Master's Thesis en_US
dc.degree.discipline Textile Management and Technology en_US


Files in this item

Files Size Format View
etd.pdf 3.445Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record