Validating the Arcam EBM Process as an Alternative Fabrication Method for Titanium-6Al-4V Alloys

Show simple item record

dc.contributor.advisor Jerome Cuomo, Committee Chair en_US
dc.contributor.author Bass, Brendon Stuart en_US
dc.date.accessioned 2010-04-02T18:17:12Z
dc.date.available 2010-04-02T18:17:12Z
dc.date.issued 2008-04-29 en_US
dc.identifier.other etd-12182007-151956 en_US
dc.identifier.uri http://www.lib.ncsu.edu/resolver/1840.16/2757
dc.description.abstract The purpose of this work has been to show that Ti-6Al-4V alloys produced using the Arcam EBM process meet all the necessary requirements stated in AMS 4999 and other Ti-6Al-4V specifications. Ti-6Al-4V samples were fabricated using the Arcam EBM process and their microstructural and mechanical properties were evaluated using optical microscopy, scanning electron microscopy, tensile testing, hardness testing, and fracture testing. The results of these tests showed that, in general, the Arcam EBM produced samples were satisfactory. en_US
dc.rights I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. en_US
dc.subject electron beam machining en_US
dc.subject titanium alloys en_US
dc.subject material testing en_US
dc.subject Ti-6Al-4V en_US
dc.subject free form fabrication en_US
dc.title Validating the Arcam EBM Process as an Alternative Fabrication Method for Titanium-6Al-4V Alloys en_US
dc.degree.name MS en_US
dc.degree.level thesis en_US
dc.degree.discipline Materials Science and Engineering en_US


Files in this item

Files Size Format View
etd.pdf 11.40Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record