Core-Sheath Differentially Biodegradable Nanofiber Structures for Tissue Engineering

Show simple item record

dc.contributor.advisor Dr. Bhupender S. Gupta, Committee Chair en_US
dc.contributor.author Moghe, Ajit Keshav en_US
dc.date.accessioned 2010-04-02T19:17:50Z
dc.date.available 2010-04-02T19:17:50Z
dc.date.issued 2008-10-09 en_US
dc.identifier.other etd-07022008-142257 en_US
dc.identifier.uri http://www.lib.ncsu.edu/resolver/1840.16/5676
dc.description.abstract In recent years, it has been shown that the nanofiber structures prepared using electrospinning can serve as near ideal substrates for engineering tissues. Various biodegradable polymers of natural and synthetic origins have been used to construct the nanofiber scaffolds. The use of natural polymers is important in that they contain specific cell recognition sites that are capable of binding cells. Synthetic biodegradable polymers, on the other hand, can provide the necessary mechanical properties and their degradation rate can be controlled positively. When used alone, however, neither can provide an ideal structure for long-term development of tissues. This is because the regenerated natural polymers, although greatly biocompatible, are weak and degrade rapidly and uncontrollably, while the synthetic polymers, although mechanically more stable, are not as biocompatible. The focus of the current investigation was, therefore, to combine natural and synthetic polymers and to produce materials that have novel hybrid properties at the nano level. An optimum structure proposed was a differentially biodegradable bicomponent nanofiber with the sheath of natural and the core of synthetic polymers. Co-axial electrospinning was used to prepare the proposed core-sheath nanofibers. A major objective of the current research was to develop and optimize the technology to produce uniform bicomponent nanofibers of predictable morphologies by understanding the effects of various material and process variables such as solution concentration, solvent type, solution flow rate, and applied voltage. Two natural polymers (collagen and gelatin) and one synthetic biodegradable polymer (PCL) were used to develop the proposed structures. The factors that affected the bicomponent fiber formation were: interfacial tension between sheath and core solutions, volatility of the solvent, and applied voltage. By minimizing the interfacial tension, selecting the solvents with low vapor pressure, and adjusting the voltage to a value lying within a particularly narrow range, uniform bicomponent fibers were obtained. Other factors such as polymer concentrations and flow rates were shown to directly affect the dimensions of the sheath and the core. It was hypothesized that the bicomponent structures produced would be differentially biodegradable in that the natural polymer sheath would degrade relatively faster, after initiating the cell activity, and the synthetic polymer core would degrade at a much slower rate and continue to support the cell growth over the required longer period of time. Collagen-PCL sheath-core bicomponent structure was visualized as the most suitable combination for tissue engineering applications and hence, the degradation behavior of this particular structure was investigated. The results showed that for the observed thirty day period of degradation, only collagen from the sheath degraded. The degradation rate of the polymer was highest within the first hour and decreased continuously with time. The degradation within the first hour was high enough to cause the polymer to lose about 50% of the weight. Degradation in PCL was too small to be effectively measured. The degradation behavior of collagen was modeled using a mathematical approach. The model suggested that the mass loss of the polymer due to degradation was proportional to the natural logarithm of time. Cell culture studies on the collagen-PCL bicomponent structures demonstrated, as hypothesized, the improvement in biocompatibility and hydrophilicity of the structure due to the presence of collagen on the surface of PCL. The superiority of the bicomponent structure (over that of the PCL control) was evidenced by the uniform cell seeding and the relatively much higher differentiation of the human adipose derived adult stem cells (hADASCs) into osteoblasts. It could, therefore, be concluded that the hybrid structures developed in this research had very high potential for use as scaffolds for engineering tissues. en_US
dc.rights I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. en_US
dc.subject solution conductivity en_US
dc.subject synthetic polymer en_US
dc.subject natural polymer en_US
dc.subject polymer concentration en_US
dc.subject solution flow rate en_US
dc.subject bone en_US
dc.subject nanofibers en_US
dc.subject cell differentiation en_US
dc.subject degradation en_US
dc.subject interfacial tension en_US
dc.subject collagen en_US
dc.subject vapor pressure en_US
dc.subject solvent en_US
dc.subject applied voltage en_US
dc.subject nanotechnology en_US
dc.subject bicomponent en_US
dc.subject PCL en_US
dc.subject gelatin en_US
dc.subject scaffolds en_US
dc.subject stem cells en_US
dc.subject coaxial electrospinning en_US
dc.title Core-Sheath Differentially Biodegradable Nanofiber Structures for Tissue Engineering en_US
dc.degree.name PhD en_US
dc.degree.level dissertation en_US
dc.degree.discipline Fiber and Polymer Science en_US
dc.degree.discipline Biomedical Engineering en_US


Files in this item

Files Size Format View
etd.pdf 7.502Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record